How to Fix Windows in a Pontiac Montana

For optimum visibility while driving your Pontiac Montana, you will need all of your car windows to be in perfect condition. A crack or chip in a window can easily grow and cause further damage to the glass. For the most economical repair, you can do the job yourself using a few materials that can be purchased at a local auto supply store.

Instructions

1

Scrub the damaged window with a mild detergent and water solution using a cloth. Rinse and dry it with another cloth.

2

Put on safety goggles and carefully extract any loose glass shards from the crack.

3

Insert the liquid resin tube supplied with the stabilizer unit into the injector cartridge. Put the injector cartridge into the suction cup stabilizer unit. There is a dedicated opening for this; refer to the product instructions if necessary.

4

Gently place the stabilizer on the window. Make sure the damaged areas are directly under the suction cup at the base of the stabilizer. Push down on the stabilizer to create suction that will hold it in place.

5

Remove the injector from its port inside the stabilizer. At this point, the resin will flow from the resin tube into the crack.

6

Remove the stabilizer from the window once the resin tube is empty.

7

Measure the length of the resin repair and cut the adhesive strips to fit. Place the strips over the resin for several hours, then remove and discard the strips.

Related Posts by Categories