How to Fix a 1998 Honda Civic Power Window Track

The power window track on your 1998 Honda Civic is used to guide your power windows up and down while preventing a sudden fall or an odd angle tilt. When this track is not functioning correctly, the direct result will be that your windows will not open and close properly. In order to alleviate this you will have to fix your power window track by reinserting the entire length of the window back into the power window track.

Instructions

1

Remove all of the exposed screws on the door panel, around the door handle, and in the armrest using a Phillips head screwdriver.

2

Lower the windows down as far as it can go.

3

Disconnect the wiring harness from the power window controls and remove the armrest and door handle.

4

Remove the speaker from the lower corner of the door and disconnect it from the wiring harness.

5

Pry off the door panel using your hands or a flathead screwdriver wrapped in a shop rag. Start at the lower corner and work your way around until the entire panel pops off.

6

Loosen the brass mounting bolt on the lower corner of the door.

7

Use the hole where the speaker was and move the window until it slides into the power window track.

8

Tighten the brass mounting bolt.

9

Reattach the door panel to the door by pushing it until all the tabs snap into place.

10

Snap the wiring harnesses for the speaker and the power window control back into place.

11

Screw the armrest, speaker, and door handle into place with the screws your removed earlier and a Phillips head screwdriver.

Related Posts by Categories