The front brake rotors on a 1997 Ford Explorer XLT are a part of the braking system. As the brake pads wear down, so do the brake rotors, and they replacement or resurfacing. Doing so is not a complicated process, and it should take about one hour. It does not require any special tools or equipment.
Instructions
- 1
Park the Explorer on a level surface and turn off its ignition. Loosen the lug nuts, using a tire iron. Raise the Ford Explorer with the jack and raise jack stands to the frame to support the vehicle. Remove the lug nuts and the wheels. Move them away from your workspace.
2Remove the anchor plate-to-steering knuckle bolts that hold the brake caliper to the steering knuckle, using the 3/8-inch ratchet and socket. Hang the caliper from the underside of the vehicle with the mechanics wire, ensuring the brake line does not twist or kink up.
3Pull the wheel hub off the front of the rotor. Remove the rotors center bolt with the 3/8-inch ratchet and socket. Remove the rotor from the vehicle.
0 comments:
Post a Comment